PT-50 model plain bushing is
PT-50R, AD10R and AD44R recal nut is standard.
PT50R, AD10R, AD44R and MT39R friction nut design
for easy calibration.
304 stainless steel external
parts. Welded construction.
Corrosion resistant to most chemicals.
Per ASME B40.3 dustproof and
Anodized aluminum with large
black numbers and graduations.
AD10R and AD44R models
polycarbonate lens is standard.
PT50 and PT50R models polycarbonate lens is standard
up to 300°F (150°C) and glass
lens over 300°F (150°C).
Helix coil is silicone coated on
ranges below 500°F for vibration dampening and to
maximize heat transfer and response time.
±1% full span per ASME B40.3
Up to 250°F 100%; 250°F to
550°F, 50%; 550°F to 1000°F, continuous use
up to 800°F, intermittent use over 800°F.
Standard on 5" PT50R, AD10R and AD44R.